HUBB Reset & Teardown (FCC ID 2ATIMHUBB)

http://www.tpmseuroshop.com/documents/declaration_conformities 

Unit 11 Technology Park 
Belfast Road 
Antrim, Northern Ireland, BT41 1QS 
The device under test is manufactured by the grantee (Sensata) and sold as an OEM 
product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc…, the grantee must ensure 
the end-user has all applicable / appropriate operating instructions. When end-user 
instructions are required, as in the case of this product, the grantee must notify the OEM to 
notify the end- user. 

Sensata will supply this document to the reseller/distributor dictating what must be 
included in the end user’s manual for the commercial product. 

INFORMATION TO BE INCLUDED IN THE END USER'S MANUAL 

The following information (in blue) must be included in the end product user’s manual 
to ensure continued FCC and Industry Canada regulatory compliance. The ID numbers 
must be included in the manual if the device label is not readily accessible to the end 
user. The compliance paragraphs below must be included in the user's manual. 

 FCC ID: 2ATIMHUBB IC: 25094-HUBB 

This device complies with Part 15 of the FCC Rules and with Licence exempt RSS 
standards of Industry Canada. Operation is subject to the following two conditions: 
(1) This device may not cause harmful interference, and 
(2) This device must accept any interference received, including interference that may 
cause undesired operation. 

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils 
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: 
(1) l'appareil ne doit pas produire de brouillage, et 
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le 
brouillage est susceptible d'en compromettre le fonctionnement. 

WARNING: Changes or modifications not expressively approved by the party responsible 
for compliance could void the user's authority to operate the equipment. The term “IC:” 
before the radio certification number only signifies that Industry Canada technical 
specifications were met. 

RF Radiation Exposure Statement: This equipment complies with FCC RF Radiation 
exposure limits set forth for an uncontrolled environment. This device and its antenna must 
not be co-located or operating in conjunction with any other antenna or transmitter. This 
equipment should be installed and operated with a minimum distance of 20cm normally 
maintained between the radiator and your body. 

******************************************************************************...