RM Reset & Teardown (FCC ID 2ACDZ-RMMINI3-RM)
Factory reset and internal photos for Broadlink RM. Broadlink smart plug.
January 15, 2026
•
1 min read
Before you buy the Broadlink RM, check what's inside.
The Broadlink RM mini 3 is a smart universal remote that uses WiFi to connect to your home network. It allows you to control infrared-based appliances like TVs, air conditioners, and set-top boxes through the Broadlink mobile app.
⚠️ NOTE: Ensure the USB power supply is stable and rated for 5V DC 1A. Keep away from water and excessive heat.
Quick Specs
- Manufacturer: Broadlink
- Model: RM
- Protocol: WiFi
- Chipset: Broadlink WiFi
- Ecosystem: Broadlink
- App: Broadlink App
🔧 Geek Corner (Flashing Info)
- Chipset: Broadcom (likely, inferred from Broadlink WiFi)
- Flashable: ❌ No
- Info: Broadlink devices are typically locked down and not designed for third-party firmware flashing like Tasmota or ESPHome.
User Manual
Scanned pages from the official user manual:
External Photos
Photos of the device exterior:
Internal Photos
Teardown photos showing the PCB and components:
Verdict
The RM is a WiFi device from the Broadlink ecosystem.
📄 Click to view full text manual (SEO)
Add Device
User Guide
BELL
4:21 PM
100%
客厅空调 TV
RM
SP
RM mini 3
a4:62:07:18:91:22
A1
f4:22:0d:a3:51:f8
Smart plug
Back
Device list
b4:42:0d:10:21:f4
Smart plug
04:02:58:10:28:44
Sensor
NEW
New device Add new device;
Local Connect device with the Wi-Fi smart phone
connected;
Remote Control online device by remote;
Offline Device is offline and it is out of control.
Please check the network connection.
NEW
Remote panel
icon
Please enter
appliance brand
or panel code to
perform search
Add remote
Air conditioner
TC
Gesture Control
User-Defined
Audio
Set Top Box
Back
Choose a remote template
Add remote
Add scene
Add device
Device list
①
①
Living room scene
Control panel
②
Blue indicator flashes quickly:
Waiting for configuration (device is under factory state
or reset). Under this circumstance, you can tap ‘ Add
device’ in APP and it guides you to finish the
configuration.
Network is down, power supply is down and then
recovers, or during the configuration process.
T ransmitting infrared signal (it occurs when learning the
infrared codes or controlling appliance).
Instruction of LED indicatoror
Universal Remote
Address: Room 106, No.611 Jianghong Road, Binjiang
District, Hangzhou, Zhejiang, China( 310052 )
Facebook Twitter Linkedin
Hangzhou Gubei Electronics Technology Co., Ltd.
Blue indicator flashes slowly:
White indicator flashes once:
Do not use non-ASCII characters in Wi-Fi name or
password. It may cause configuration failure. The device
supports Wi-Fi of 2.4G 802.11 b/g/n only.
Please place the device on open place. Please point
remote to the top of the device during learning and we
suggest the distance is less than 1m.
Please configure the device according the user guide. If
you encounter problems, please contact our
authorized distributors or our support team.
All the technical details are subjected to the actual
product performance.
Note
Website: www.ibroadlink.com
Service: [email protected]
Hotline
FCC ID: 2ACDZ-RMMINI3-RM
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
This device may not cause harmful interference, and This device
must accept any interference received, including interference that
may cause undesired operation.
NOTE : Any changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the
user's authority to operate the equipment.
FCC Radiation Exposure Statement
Product name : Universal Remote
Model : RM mini 3
Input Power : 5V DC 1A ( Micro USB )
Infrared Frequency : 38K
Working T emperature : 0 ~ 50°C
Working Humidity : ≤ 85%
Wi-Fi Frequency : 2.4GHz 802.11b/g/n
Standby Power : ≤ 0.88W
Infrared Direction : Multiple-direction infrared
Infrared Range : ≤ 8m ( Typical )
Size : 55 x 55 x 64.5mm
Net Weight : 95.5g
Specifications
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should
be installed and operated with min...