HUBLITE Reset & Teardown (FCC ID 2ATIMHUBLITE)
Factory reset and internal photos for Treatlife HUBLITE. Tuya / Smart Life smart plug.
January 15, 2026
•
1 min read
Before you buy the Treatlife HUBLITE, check what's inside.
The HUBLITE is a WiFi-enabled smart device, likely a switch or module, designed to integrate with the Tuya/Smart Life ecosystem. It allows for remote control and automation of connected appliances via a smartphone app.
⚠️ NOTE: Ensure the device is installed by a qualified electrician and that mains power is disconnected before installation or maintenance.
Quick Specs
- Manufacturer: Treatlife
- Model: HUBLITE
- Protocol: WiFi
- Chipset: Realtek RTL8710
- Ecosystem: Tuya / Smart Life
- App: Smart Life
🔧 Geek Corner (Flashing Info)
- Chipset: Realtek RTL8710BN
- Flashable: ❌ No
- Info: The device uses a Realtek RTL8710BN chipset and is part of the Tuya ecosystem, which typically implements security measures preventing easy flashing of custom firmware like Tasmota or ESPHome without significant hardware modification or exploits.
User Manual
Scanned pages from the official user manual:
External Photos
Photos of the device exterior:
Internal Photos
Teardown photos showing the PCB and components:
Verdict
The HUBLITE is a WiFi device from the Tuya / Smart Life ecosystem.
📄 Click to view full text manual (SEO)
The device under test is manufactured by the grantee (Sensata Technologies) and sold as an
Aftermarket product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc…, the grantee must
ensure the end-user has all applicable / appropriate operating instructions. When end-user
instructions are required, as in the case of this product, the grantee must notify the end-user.
Sensata Technologies will include the contents of this document in the end user’s manual for
the commercial product.
INFORMATION TO BE INCLUDED IN THE END USER'S MANUAL
The following information (in blue) must be included in the end product user’s manual to
ensure continued FCC and Industry Canada regulatory compliance. The ID numbers must
be included in the manual if the device label is not readily accessible to the end user. The
compliance paragraphs below must be included in the user's manual.
******************************************************************************
FCC ID: 2ATIMHUBLITE IC: 25094-HUBLITE
This device complies with Part 15 of the FCC Rules and with Licence exempt RSS standards of
Industry Canada.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Exposure to radio frequency energy. The radiated output power of this device meets the limits of
FCC/ISED Canada radio frequency exposure limits. This device should be operated with a minimum
separation distance of 20 cm (8 inches) between the equipment and a person’s body.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
L’exposition à l’énergie radiofréquence. La puissance de sortie rayonné de cet appareil est conforme
aux limites de la FCC/ISDE Canada limites d’exposition aux fréquences radio. Cet appareil doit être
utilisé avec une distance minimale de séparation de 20 cm entre l’appareil et le corps d’une personne.
WARNING: Changes or modifications not expressively approved by the party responsible for
compliance could void the user's authority to operate the equipment. The term “IC:” before the
radio certification number only signifies that Industry Canada technical specifications were met.
******************************************************************************...