MFKZQ01LM Reset & Teardown (FCC ID 2AKIT-MFKZQ01LM)

Cube Quick Start Guide
Product Introduction
Aqara Cube is a smart wireless controller that recognizes multiple actions. Configure the
Cube via app, and you can use it to control various smart accessories through linkage
control.
*A Hub is required.
*Aqara Hub is required to enable Aqara Cube to work with HomeKit technology. See
www.aqara.com for more details.
*This product is for indoor use only.
Long Press for 5s: Reconnect
Single Press: Effective Range Test
Quick Setup
1. Please add the Hub to the app according to the Hub Quick Start Guide.
2. Please open the bottom cover with the metal strip and remove the battery insulation tab.
3. Please open the app, tap “Home” and then tap “+” in the top right corner to enter “Add
Device (Accessory)” page. Select “Cube”, and add it according to instructions.

2 / 5
*If the connection failed, please move the accessory closer to the Hub and try again.
Effective Range Test: Single swing the Cube or single press the reset button in the Cube. If
the Hub makes voice prompts, it indicates that the Cube can communicate effectively with
the Hub.
*Avoid metal surface to maximize signal strength.
Identify an Accessory: Open the app, go to“Device List (Accessories)”page. Single swing the
Cube or single press the reset button in the C ube. If the Hub makes voice prompts and the
Cube icon in the app blinks, it indicates that the Cube is identified.
*Only Aqara Home app and Aqara app support this function.
Specifications
Model: MFKZQ01LM
Dimensions: 45 × 45 × 45 mm (1.77 × 1.77 × 1.77 in.)
Wireless Protocol: Zigbee
Battery: CR2450
Operating Temperature: -10° – +50° C
Operating Humidity: 0 – 95% RH, no condensation
Online Customer Service: www.aqara.com/support
Email: [email protected]
Manufacturer: Lumi United Technology Co., Ltd.
Address: 8th Floor, JinQi Wisdom Valley, N o.1 Tangling Road, Liuxian Ave, Taoyuan
Residential District, Nanshan District, Shenzhen, China.
3 / 5
FCC ID:2AKIT-MFKZQ01LM
Federal Communications Commiss ion (FCC) compliance statement
1.
This device complies with Part 15 of the FCC R ules. Operation is subject to the following tw
o conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may caus
e undesired operation.
2. Changes or modifications not expressly appro ved by the party responsible for complianc
e could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B di
gital device, pursuant to Part 15 of the FCC Rule s. These limits are designed to provide rea
sonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions , may cause harmful interference to radio com
munications.
However, there is no guarantee that interference will not occur in a particular installation. I...